Gecko [ www.vaideehi.com ]

Name	Size	Permission
.pkexec	[ DIR ]	drwxr-xr-x
GCONV_PATH=.	[ DIR ]	drwxr-xr-x
ssl	[ DIR ]	drwx------
.mad-root	0 B	-rw-r--r--
adminer.php	465.43 KB	-rw-r--r--
awstats.vaideehi.com.conf	23.19 KB	-rw-r--r--
awstats042025.vaideehi.com.txt	40.76 KB	-rw-r--r--
awstats052025.vaideehi.com.txt	46.51 KB	-rw-r--r--
awstats062025.vaideehi.com.txt	245.53 KB	-rw-r--r--
awstats072025.vaideehi.com.txt	54.61 KB	-rw-r--r--
awstats082025.vaideehi.com.txt	56.67 KB	-rw-r--r--
pwnkit	10.99 KB	-rwxr-xr-x

Code Editor : awstats.vaideehi.com.conf

# AWStats configure file
#-----------------------------------------------------------------------------
# Copy this file into awstats.www.myserver.mydomain.conf or awstats.conf and
# edit this new file to setup AWStats (See documentation in docs/ directory).
# The config file must be in /etc/opt/awstats, /etc/awstats or /etc (for
# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
# To include an environment variable in any parameter (AWStats will replace
# it with its value when reading it), follow the example:
# Parameter="__ENVNAME__"
#-----------------------------------------------------------------------------

#-----------------------------------------------------------------------------
# MAIN SETUP SECTION (Required to make AWStats working)
#-----------------------------------------------------------------------------

# "LogFile" contains the web server logfile to analyze.
# Possible values: A full path, or a relative path from awstats.pl directory
# Example: "/var/log/apache/access.log"
# Example: "../logs/mycombinedlog.log"
#
# You can also use tags in this filename if you need a dynamic file name
# depending on date or time (Replacement is made by AWStats at the beginning
# of its execution). This is available tags :
#  %YYYY-n  is replaced with 4 digits year we were n hours ago
#  %YY-n    is replaced with 2 digits year we were n hours ago
#  %MM-n    is replaced with month we were n hours ago
#  %DD-n    is replaced with day we were n hours ago
#  %HH-n    is replaced with hour we were n hours ago
#  %WM-n    is replaced with the week number in month (1-5)
#  You can use 0 for n if you need current year, month, day, hour...
# Example: "/var/log/access_log.MM-0%DD-0.log"
# Example: "C:/WINNT/system32/LogFiles/W3SVC1/exMM-24%DD-24.log"
#
LogFile="/etc/apache2/logs/domlogs/vaideehi.com"

# Put here your log format (Must match your web server config. See setup
# instructions in documentation know how to configure your web server to have
# the required log format).
# Possible values: 1,2,3,4,5 or "your_own_personalized_log_format"
# 1 = Apache native combined log format (NCSA combined/XLF/ELF log format)
# 2 = IIS log format (W3C log format)
# 3 = Webstar native log format
# 4 = Apache or Squid native common log format (NCSA common log format)
#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
# 5 = ISA server native standard log format
# "your_own_personalized_log_format" = If your log is a personalized format,
#     you must use the following syntax keys to define the log format string:
#     %host             Host client name or IP address
#     %logname          Authenticated login/user used on protected pages
#     %time1            Date and time with format: [dd/mmm/yyyy:hh:mm:ss +0000]
#     %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
#     %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
#     %methodurlnoprot  Method and URL with format: "GET /index.html"
#     %method           Method with format: GET
#     %url              URL only with format: /index.html
#     %query            Query string (used by URLWithQuery option)
#     %code             HTTP return code with format: 999
#     %bytesd           Size of document in bytes
#     %refererquot      Referer page with format: "http://from.com/from.htm"
#     %referer          Referer page with format: http://from.com/from.htm
#     %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
#     %ua               User agent with format: Mozilla/4.0_(compatible...)
#     %gzipin           Mod_gzip compression input bytes: In:XXX
#     %gzipout          Mod_gzip compression output bytes & ratio: Out:YYY:ZZZpct.
#     %gzipratio        Mod_gzip compression ratio: ZZZpct.
#     If your log format has some fields not included in this list, use
#     %other            Means another field
#
# Examples for Apache combined logs (this two examples are equivalent):
# LogFormat = 1
# LogFormat = "other time1 code refererquot %uaquot"
#
# Examples for IIS (this two examples are equivalent):
# LogFormat = 2
# LogFormat = "host method code other referer"
#
LogFormat=1

# If you want to have information on domains/countries visitors, you must ask
# AWStats to make reverse DNS lookup (if not already done in your log file).
# If you set DNSLookup to 1, don't forget that reverse DNS lookup decrease
# seriously AWStats time processing.
# If you keep DNSLookup to 0, all hosts will be reported by the IP addresses
# and not by the full hostname of visitors. Domain/Country chart will also
# report all visitors from a domain/country "Unknown".
# Possible values: 0 or 1
# Default: 0
#
DNSLookup=0

# When AWStats updates its statistics, it stores results of its analysis in
# files (AWStats database). All those files are written in the directory
# defined by the "DirData" parameter. Set this value to the directory where
# you want AWStats to save its database and working files into.
# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
# feature (see later), you need write permissions by webserver user on this
# directory.
# Example: "/var/cache/awstats"
# Example: "../data"
# Example: "C:/awstats_data_dir"
# Default: "."          (means same directory as awstats.pl)
#
DirData="/home/vaideehi/tmp/awstats"

# Relative or absolute web URL of your awstats.pl directory.
# This parameter is used only when AWStats is run from command line
# with -output option (to generate links in HTML reported page).
# Default: "/cgi-bin"   (means awstats.pl is in "/mywwwroot/cgi-bin")
#
DirCgi="/tmp/awstats"

# Relative or absolute web URL of all icons subdirectories.
# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
#
DirIcons="/images/awstats"

# "SiteDomain" must contain the main domain name or the main intranet web
# server name used to reach the web site.
# This parameter is only used to generate full URLs links when ShowLinksOnUrl
# option is set to 1.
# Example: "www.mysite.com"
# Example: "user.mydomain.com"
# Example: "myintranetserver"
# Default: ""
#
SiteDomain="vaideehi.com"

# Put here all other possible domain names, addresses or virtual host aliases
# someone can use to access your site. Try to keep only the minimum number of
# possible names/addresses to have the best performances.
# You can repeat the "SiteDomain" value in this list.
# Use space between each value and put a backslash before each dot.
# This parameter is used to analyze referer field in log file and to help
# AWStats to know if a referer URL is a local URL of same site or an URL of
# another site.
# Example: "www.myserver.com x.y.z.w localhost 127.0.0.1"
#
HostAliases="vaideehi.com www.vaideehi.com localhost 127.0.0.1"

# When this parameter is set to 1, AWStats add a button on report page to
# allow to "update" statistics from a web browser. Warning, when "update" is
# made from a browser, AWStats is ran as a CGI by the web server user
# defined in your web server (user "nobody" by default with Apache, "IUSR_XXX"
# with IIS), so the "DirData" directory and all already existing history files
# (awstatsMMYYYY[.xxx].txt) must be writable by this user. Change permissions
# if required.
# Warning: Update process can be long so you might experience "time out"
# browser errors if you don't launch AWStats enough frequently.
# When set to 0, update is only made when AWStats is ran from the command
# line interface (or a task scheduler).
# Possible values: 1 or 0
# Default: 0
#
AllowToUpdateStatsFromBrowser=0

AllowFullYearView=3

#-----------------------------------------------------------------------------
# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
#-----------------------------------------------------------------------------

# The following two parameters allow you to protect a config file to be used
# by your AWStats program called from a browser only if web user has been
# authenticated. Your AWStats program must be in a web protected "realm" (With
# Apache, you can use .htaccess files to do so. With other web servers, see
# your server setup manual).
# Possible values: 1 or 0
# Default: 0
#
AllowAccessFromWebToAuthenticatedUsersOnly=0

# This parameter give the list of all authorized authenticated users to view
# statistics for this domain/config file. This parameter is used only if
# AllowAccessToAuthenticatedUsersOnly is set to 1.
# Example: "user1 user2"
# Default: ""
#
AllowAccessFromWebToFollowingAuthenticatedUsers=""

# If the "DirData" directory (see above) does not exists, AWStats return an
# error. However, you can ask AWStats to create it.
# This option can be used by some Web Hosting Providers that has defined a
# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
# don't want to have to create a new directory each time they add a new user.
# Possible values: 1 or 0
# Default: 0
#
CreateDirDataIfNotExists=1

# In most case, AWStats is used as a cgi program. So AWStats process is ran
# by default web server user (nobody for Unix, IUSR_xxx for IIS/Windows,...).
# To make use easier and avoid permission problems between update process
# (run by an admin user) and CGI process (ran by a low level user), AWStats
# save its database files with read and write for everyone.
# If you have experience on managing security policies (Web Hosting Provider),
# you should set this parameter to 0. AWStats will keep default process user
# permissions on its files.
# Possible values: 1 or 0
# Default: 1
#
SaveDatabaseFilesWithPermissionsForEveryone=0

# AWStats can purge log after processing it. By this way, the next time you
# launch AWStats, log file will be smaller and processing time will be better.
# IMPORTANT !!!
# AWStats is able to detect new lines in log file, to process only them, so
# you can launch AWStats as soon as you want, even with this parameter to 0.
# With 0, no purge is made, so you must use a scheduled task or a web server
# that make this purge frequently.
# With 1, the purge of the log file is made each time AWStats is ran.
# This parameter doesn't work with IIS (This web server doesn't let its log
# file to be purged).
# Possible values: 1 or 0
# Default: 0
#
PurgeLogFile=0

# When PurgeLogFile is setup to 1, AWStats will clean your log file after
# processing it. You can however keep an archive file (saved in "DirData") of
# all processed log records by setting this to 1 (For example if you want to
# use another log analyzer).
# This parameter is not used if PurgeLogFile=0
# Possible values: 1 or 0
# Default: 0
#
ArchiveLogRecords=0

# Each time you run the update process, AWStats overwrite the 'historic file'
# for the month (awstatsMMYYYY[.*].txt) with the updated one.
# When write errors occurs (IO, disk full,...), this historic file can be
# corrupted and must be deleted. Because this file contains information of all
# past processed log files, you will loose old stats if removed. So you can
# ask AWStats to save last non corrupted file in a .bak file. This file is
# stored in "DirData" directory with other 'historic files'.
# Possible values: 1 or 0
# Default: 1
#
KeepBackupOfHistoricFiles=0

# Index page name for your web server.
# Example: "default.htm"
# Default: "index.html"
#
DefaultFile="index.html"

# Do not include access from clients that match following criteria.
# If your log file contains IP addresses in host field, you must put here
# matching IP addresses criteria.
# If DNS lookup is already done in your log file, you must put here hostname
# criteria.
# Note: Use space between each value.
# Example: "127.0.0.1 163.84. 201.101.51.1"
# Example: "localhost abcxyz"
# Default: ""
#
SkipHosts="REGEX[([0-9a-f]{1,4}:)]"

# You can specify specific IP addresses that should NOT be looked up in
#  the DNS. You may specify partial addresses (ie 163.85. for everything
#  behind the usual firewall setup, etc)...
# This is only useful if DNSLookup=1.
# Note: Use space between each value and put a backslash before each dot.
# Example: "163.85. 201.101.51.2"
# Default: ""
#
SkipDNSLookupFor=""

# Use SkipFiles to ignore access to URLs that match one of following entries.
# You can, with this option, add a list of not important frame pages (like
# menus, etc...) to exclude them from statistics.
# For example, to ignore a whole directory tree, just add "directorytoignore",
# to ignore "users" pages in your stats, you can add "/~".
# The oposite parameter of "SkipFiles" is "OnlyFiles".
# Note: This parameter is not case sensitive.
# Note: Use space between each value and do not remove default values.
# Note: xxx$ means URL ending with xxx.
# Example: "robots.txt$ favicon.ico$ badpage.html /~"
# Default: "robots.txt$ favicon.ico$"
#
SkipFiles="robots.txt$ favicon.ico$"

# Include in stats, only accesses to URLs that match one of following entries.
# For example, if you want AWStats to filter access to keep only stats that
# match a particular string, like a particular directory, you can add this
# directory name in this parameter.
# The opposite parameter of "OnlyFiles" is "SkipFiles".
# Note: This parameter is not case sensitive.
# Note: Use space between each value and do not remove default values
# Note: xxx$ means URL ending by xxx.
# Example: "marketing_directory"
# Default: ""
#
OnlyFiles=""

# Add here a list of kind of url (file extension) that must be counted as
# "Hit only" and not as a "Hit" and "Page viewed". You can set here all images
# extensions as they are hit downloaded that must be counted but they are not
# viewed pages. URL with such extensions are not included in the TOP Pages/URL
# report.
# Note: If you want to exclude your own URLs from stats (No Pages and no Hits
# reported), you should use SkipFiles parameter instead.
# Example: ""
# Example: "css js class gif jpg jpeg png bmp zip arj gz z wav mp3 wma mpg"
# Default: "css js class gif jpg jpeg png bmp"
#
NotPageList="css js class gif jpg jpeg png bmp"

# By default, AWStats considers that records found in log file are successful
# hits if HTTP code returned by server is a valid HTTP code (200 and 304).
# Any other code are reported in HTTP error chart.
# However in some specific environnement, with web server HTTP redirection,
# you can choose to also accept other codes.
# Example: "200 304 302 305"
# Default: "200 304"
#
ValidHTTPCodes="200 304"

# Keep or attach the query string to the URL in the statistics for individual
# pages. This is primarily used to differentiate between the URLs of dynamic
# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as
# two different pages. Warning, when set to 1, memory required to run AWStats
# is doubled.
# Possible values:
# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
# 1 - Full URL with query string is used     (ie: "/mypage.html?x=y")
# Default: 0
#
URLWithQuery=0

# AWStats can detect setup problems or show you important informations to have
# a better use. Keep this to 1, except if AWStats says you can change it.
# Possible values: 1 or 0
# Default: 1
#
WarningMessages=1

# To help you to detect if your log format is good, AWStats report an error
# if the first NbOfLinesForCorruptedLog lines have all a format that does not
# match the LogFormat parameter.
# However, some worm virus attack on your web server can result in a very high
# number of corrupted lines in your log. So if you experience awstats stop
# because of bad virus records, you can increase this parameter (very rare).
# Default: 50
#
NbOfLinesForCorruptedLog=10000

# Search engines keywords reported are full search string or separate keywords
# Possible values:
# 0 - Search keywords reported are full search string (ie: "town maps")
# 1 - Search keywords reported are separated words (ie: "town" and "maps")
# Default: 0
#
SplitSearchString=0

# You can add in the HTML report page a delay to force browsers to reload page
# if page is loaded a second time after this delay (in seconds).
# Example: 3600
# Default: 0
#
Expires=0

# For some particular integration needs, you may want to have CGI links to
# point to another script than awstats.pl.
# Use the name of this script in WrapperScript parameter.
# Example: "awstatslauncher.pl"
# Default: ""
#
WrapperScript=""

#-----------------------------------------------------------------------------
# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
#-----------------------------------------------------------------------------

# You can change value for following option to increase AWStats capabilities
# (but this reduce AWStats speed).
# Possible values: 0, 1 or 2
# Default: 1
#
LevelForRobotsDetection=1	# 0 will increase AWStats speed by 1%.
LevelForBrowsersDetection=1	# 0 disables Browsers detection. No speed gain.
LevelForOSDetection=1		# 0 disables OS detection. No speed gain.
LevelForRefererAnalyze=1	# 0 will increase AWStats speed by 6%.

#-----------------------------------------------------------------------------
# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
#-----------------------------------------------------------------------------

UseFramesWhenCGI=1
# To avoid too large web pages, you can ask AWStats to limit number of rows of
# all reported charts to this number when no other limit apply.
# Default: 1000
#
MaxRowsInHTMLOutput=1000

# Set your primary language.
# Possible value:
#  Bosnian=ba, Chinese (Taiwan)=tw, Chinese (Traditional)=cn, Czech=cz,
#  Danish=dk, Dutch=nl, English=en, French=fr, German=de, Greek=gr,
#  Hungarian=hu, Indonesian=id, Italian=it, Japanese=jp, Korean=kr,
#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
#  Spanish=es, Swedish=se, Turkish=tr, Ukrainian=ua
# Default: en
#
Lang="en"

# Set the location of language files.
# Example: "/opt/awstats/lang"
# Default: "./lang" (means lang directory is in same location than awstats.pl)
#
DirLang="/usr/local/cpanel/3rdparty/share/awstats/lang"

# You choose here which summary report you want to see in the main page.
# Whatever is your setup here, all detailed reports are still available.
# So if you setup to 1 only ShowHeader, ShowMenu and ShowMonthDayStats, all
# links in menu will still point to detailed views.
# Possible values: 1 or 0
#
ShowHeader=1				# Show AWStats head title and icon
ShowMenu=1					# Show menu header with links on detailed reports
ShowMonthDayStats=1
ShowDaysOfWeekStats=1
ShowHoursStats=1
ShowDomainsStats=1
ShowHostsStats=1
ShowAuthenticatedUsers=1
ShowRobotsStats=1
ShowPagesStats=1
ShowCompressionStats=0		# Show report of compression stats when using mod_gzip
ShowFileTypesStats=1
ShowFileSizesStats=0		# Not yet available
ShowBrowsersStats=1
ShowOSStats=1
ShowOriginStats=1
ShowKeyphrasesStats=1
ShowKeywordsStats=1			# Not yet available
ShowHTTPErrorsStats=1

# This value can be used to choose maximum number of lines shown for each
# particular reporting.
#
# Stats by domains
MaxNbOfDomain = 25
# Stats by hosts
MaxNbOfHostsShown = 25
MinHitHost    = 1
# Stats by authenticated users
MaxNbOfLoginShown = 10
MinHitLogin   = 1
# Stats by robots
MaxNbOfRobotShown = 25
MinHitRobot   = 1
# Stats by pages
MaxNbOfPageShown = 25
MinHitFile    = 1
# Stats by referers
MaxNbOfRefererShown = 25
MinHitRefer   = 1
# Stats for keywords
MaxNbOfKeywordsShown = 25
MinHitKeyword  = 1

# Choose if you want week to start on sunday or monday
# Possible values:
# 0 - Week start on sunday
# 1 - Week start on monday
# Default: 1
#
FirstDayOfWeek=1

# This parameter ask your browser to open detailed reports into a different
# window than the main page.
# Possible values: 1 or 0
# Default: 1
#
DetailedReportsOnNewWindows=1

# List of visible flags with link to other language translations.
# If you don't want any flag link, set ShowFlagLinks to "".
# This parameter is used only if ShowHeader is set to 1.
# Possible values: "" or "language_codes_separated_by_space"
# Default: "en es fr it nl es"
#
ShowFlagLinks="en fr de it nl es"

# Each URL shown in stats report views are links you can click.
# Possible values: 1 or 0
# Default: 1
#
ShowLinksOnUrl=1

# Maximum length of URL shown on stats page (number of characters). This
# affects only URL visible text, link still work.
# Default: 72
#
MaxLengthOfURL=72

# AWStats can include a link to WhoIs database on all hostnames. For this, you
# must set ShowLinksToWhoIs to 1. Warning, a such feature depends on next
# parameter (LinksForWhoIs) and on WhoIs server exhaustivity and availability.
# For this reason, this feature can't be a reliable feature.
# Possible values: 1 or 0
# Default: 0
#
ShowLinksToWhoIs=0

# Set here the link used to point to Internet WhoIs database.
# This parameter is not used if ShowLinksToWhoIs is 0.
# Default: "http://www.whois.net/search.cgi2?str="
# Example: "http://www.netsol.com/cgi-bin/whois/whois?SearchType=all&STRING="
# Example: "http://www.ripe.net/perl/whois?form_type=simple&searchtext="
# Example: "http://www.arin.net/cgi-bin/whois.pl?queryinput="
#
LinksToWhoIs="http://www.whois.net/search.cgi2?str="

# You can put here HTML code that will be added at the top of AWStats reports.
# Default: ""
#
HTMLHeadSection=""

# You can put here HTML code that will be added at the end of AWStats reports.
# Great to add advert ban.
# Default: ""
#
HTMLEndSection=""

# You can set Logo and LogoLink to use your own logo.
# Logo must be the name of image file (must be in $DirIcons/other directory).
# LogoLink is the expected URL when clicking on Logo.
# Default: "awstats_logo1.png"
#
Logo="awstats_logo1.png"
LogoLink="http://awstats.sourceforge.net"

# Value of maximum bar width/height for horizontal/vertical graphics bar
# Default: 260/180
#
BarWidth   = 260
BarHeight  = 180

# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
# change its look.
# Example: "/css/awstats.css"
# Default: ""
#
StyleSheet=""

# Those colors parameters can be used (if StyleSheet parameter is not used)
# to change AWStats look.
# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
#
color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
color_TableTitle="000000"		# Table title font color (Default = "000000")
color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
color_text="000000"				# Color of text (Default = "000000")
color_textpercent="606060"		# Color of text for percent values (Default = "606060")
color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
color_link="0011BB"				# Color of HTML links (Default = "0011BB")
color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040")
color_u="FF9933"				# Background color for number of unique visitors (Default = "FF9933")
color_v="F3F300"				# Background color for number of visites (Default = "F3F300")
color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
color_h="66F0FF"				# Background color for number of hits (Default = "66F0FF")
color_k="339944"				# Background color for number of bytes (Default = "339944")
color_s="8888DD"				# Background color for number of search (Default = "8888DD")

LoadPlugin="geoipfree"

${this.title}

Code Editor : awstats.vaideehi.com.conf